Camesa

Camesa Contact Us - Phone Call us at +1(281) 344-0905,
Camesa Contact Us - Envelope E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

Camesa EMC Banner 1

EMC Product Catalog

13/32" (10.19 mm) 3-Conductor Cable 3Q40

13/32" (10.19 mm) 3-Conductor Cable 3Q40

PROPERTIES:

Cable Diameter: 0.408 +0.005” - 0.002” (10.36 mm + 0.127mm -0.05mm)
Minimum Sheave Diameter: 20.4" (51.8 cm)
Cable Stretch Coefficient: 0.90 ft/Kft/Klbs (1.01 m/km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 1,200 VDC
Recommended Operating Conductor Voltage: 500 VDC
Conductor AWG Rating: 15
Minimum Insulation Resistance: 1,500 MegΩ/Kft @ 500VDC (457 MegΩ/Km @ 500VDC)
Armor Electrical Resistance: 1.5 Ω/Kft (4.92 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 15,200 lbs (67.6 KN) Nominal
Maximum Suggested Working Tension: 7,600 lbs (33.8 KN)
Number and Size of Wires:
Inner Armor 18 x 0.0425” (1.08 mm)
Outer Armor 20 x 0.0510” (1.30mm)
Average Wire Breaking Strength:
Inner Armor 383.4 lbs (1.706 KN)
Outer Armor 552 lbs (2.457 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachTape TypeIn AirIn H2OSpec. Gravity
 °F
°C
 in
mm
in
mm
Ω/Kft
Ω/Km
pf/ft
pf/m
in
mm
 lbs/Kft
Kg/Km
3Q40PXZ420
216
Camtane0.0085
0.216
19x0.0142
19x0.361
3.1
10.17
90.1
295.6
0.088
2.235
Dacron®*303
450
250
372
N/A
420
216
Tefzel0.009
0.229
19x0.0142
19x0.361
3.1
10.17
90.1
295.6
0.106
2.692
Dacron®*303
450
250
372
N/A
  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed and cables are post tensioned.
  • Core assembly – Conductors are bound with conductive tape and voids are filled with conductive paste and string.
  • Copper strands consist of a total of nineteen wires. Voids in the copper strand are filled with a water-blocking agent. to reduce water and gas migration. Conductor resistance is measured at 68° F.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.

    *Dacron® does not withstand temperatures exceeding 300°F.  Nomex® is available by customer request at time of order for additional cost.

    View Product Specification Page