Camesa Contact Us - Phone Call us at +1(281) 344-0905,
E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

EMC Product Catalog

0.474" (12.0mm) 7-Conductor Extra High Strength 7H47-EHS

Maximum Conductor Voltage:	1100 VDC
Conductor AWG Rating:	20
Minimum Insulation Resistance:	1,500 MegΩ/Kft @500VDC	(457 MegΩ/Km @500VDC)
Armor Electrical Resistance:	1.1 Ω/Kft	(3.6 Ω/Km)

Cable Breaking Strength:
Ends Fixed:	24,500 lbs	(109 KN) Nominal
Maximum Suggested Working Tension:	12,250 lbs	(55 kN)
Number and Size of Wires:
Inner Armor	18x0.0470"	(1.194 mm)
Outer Armor	18 x 0.0655"	(1.664 mm)
Average Wire Breaking Strength:
Inner Armor	542 lbs	(2.4 KN)
Outer Armor	1054 lbs	(4.7 KN)

* See attached specification sheet for recommended maximum temperature exposure times.

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
Core assembly – Conductors are bound with conductive tape and voids are filled with conductive paste and string.
Conductors are “Water Blocked” to reduce water and gas migration. Conductor resistance is measured at 68° F.
The temperature rating assumes a normal gradient for both temperature and weight.
Center conductor construction is 6x0.0142” with a non-conductive center member. The typical capacitance is reduced by approximately 5 to 10% and the capacitance is increased by approximately 5 to 10% in comparison to the outer conductors.
All values shown are nominal or typical values.
Dacron® does not withstand temperatures exceeding 300°F. Nomex® is available by customer request at time of order for additional cost.