Camesa
Camesa EMC Banner 2

EMC Product Catalog

1/10” (2.56 mm) Monoconductor 1N10

1/10” (2.56 mm) Monoconductor 1N10

PROPERTIES:

Cable Diameter: 0.101” +0.004” -0.002” (2.56mm + 0.10mm -0.05mm)
Minimum Sheave Diameter: 6” (15 cm)
Cable Stretch Coefficient: 13.1 ft/Kft/Klbs (14.72 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 300 VDC
Conductor AWG Rating: 24
Minimum Insulation Resistance: 1,500 MegaΩ/Kft @ 500VDC (457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance: 22.0 Ω/Kft (72.2 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 1,000 lbs (4.4 KN Nominal)
Maximum Suggested Working Tension: 500 lbs (2.2 KN)
Number and Size of Wires:
Inner Armor 12 x 0.0140” (0.356 mm)
Outer Armor 18 x 0.0140” (0.356 mm)
Average Wire Breaking Strength:
Inner Armor 42 lbs (0.19 KN)
Outer Armor 42 lbs (0.19 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachIn AirIn H2OSpec. Gravity
 °F
°C
 in
mm
in
mm
Ω/Kft
Ω/Km
pf/ft
pf/m
in
mm
lbs/Kft
Kg/Km
1N10RP300
149
Poly0.012
0.305
7x0.0085
7x0.216
21.0
69.0
51
167
0.049
1.244
19
28
15
23
  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEI PS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values. 
  • Not for use in oil and gas wells. 

    View Product Specification Page