Camesa
SEARCHGO
Camesa EMC Banner 2

EMC Product Catalog

1/8” (3.20 mm) Monoconductor 1N12

1/8” (3.20 mm) Monoconductor 1N12

PROPERTIES:

Cable Diameter: 0.126” +0.004” -0.002” (3.20mm + 0.10mm -0.05mm)
Minimum Sheave Diameter: 7” (18 cm)
Cable Stretch Coefficient: 6.5 ft/Kft/Klbs (7.30 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 300 VDC
Conductor AWG Rating: 24
Minimum Insulation Resistance: 1,500 MegaΩ/Kft @ 500VDC (457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance: 13.0 Ω/Kft (42.6 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 1,600 lbs (7.1 KN) Nominal
Maximum Suggested Working Tension: 800 lbs (3.5 KN)
Number and Size of Wires:
Inner Armor 12 x 0.0175” (0.444 mm)
Outer Armor 18 x 0.0175” (0.444 mm)
Average Wire Breaking Strength:
Inner Armor 65 lbs (0.29 KN)
Outer Armor 65 lbs (0.29 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachIn AirIn H2OSpec. Gravity
 °F
°C		 in
mm		in
mm		Ω/Kft
Ω/Km		pf/ft
pf/m		in
mm		lbs/Kft
Kg/Km
1N12RP300
149		Poly0.0175
0.444		7x0.0085
7x0.216		21.0
69.0		41
134		0.060
1.524		28
42		23
35		N/A
1N12RZ500
260		ETFE0.0175
0.444		7x0.0085
7x0.216		21.0
69.0		48
157		0.060
1.524		29
43		24
36		N/A
  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.
  • Not for use in oil and gas wells. 

    View Product Specification Page 

© 2015 WireCo® WorldGroup. All Rights Reserved.