Camesa Contact Us - Phone Call us at +1(281) 344-0905,
E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

EMC Product Catalog

9/32” (7.32 mm) Monoconductor 1N29-S77 Corrosion Resistant

Maximum Conductor Voltage:	1,500 VDC
Conductor AWG Rating:	16
Minimum Insulation Resistance:	1,500 MegaΩ/Kft @ 1000VDC	(457 MegaΩ/Km @ 1000VDC)
Armor Electrical Resistance:	11.3 Ω/Kft	(37.1 Ω/Km)

Cable Breaking Strength:
Ends Fixed:	8,100 lbs	(36.0 KN) Nominal
Maximum Suggested Working Tension:	4,050 lbs	(18.0 KN)
Number and Size of Wires:
Inner Armor	12 x 0.0400”	(1.016 mm)
Outer Armor	18 x 0.0400”	(1.016 mm)
Average Wire Breaking Strength:
Inner Armor	314 lbs	(1.40 KN)
Outer Armor	314 lbs	(1.40 KN)

* See attached specification sheet for recommended maximum temperature exposure times.

While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures above 400°F.
The armor wires are made of corrosion resistant alloy steel suitable for moderate H2S and CO2 environments.
Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68°F.
Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
SUPERSEAL, a special pressure seal agent, is applied between armor layers.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values.