Camesa
Camesa EMC Banner 4

EMC Product Catalog

5/16" (8.18 mm) Monoconductor 1N32 Low Resistance

5/16" (8.18 mm) Monoconductor 1N32 Low Resistance

PROPERTIES:

Cable Diameter: 0.322" +0.005" -0.002 (8.18mm +0.13mm -0.05mm)
Minimum Sheave Diameter: 18" (46 cm)
Cable Stretch Coefficient: 1.2 ft/Kft/Klbs (1.35 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 1,500 VDC
Conductor AWG Rating: 13
Minimum Insulation Resistance: 1,500 MegaΩ/Kft @1000VDC (457 MegaΩ/Km @1000VDC)
Armor Electrical Resistance: 2.1 Ω/Kft (6.9 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 12,000 lbs (53.4 KN) Nominal
Maximum Suggested Working Tension: 6,000 lbs (26.7 KN)
Number and Size of Wires:
Inner Armor 12x0.0445" (1.130 mm)
Outer Armor 18x0.0445" (1.130 mm)
Average Wire Breaking Strength:
Inner Armor 442 lbs (1.97 KN)
Outer Armor 442 lbs (1.97 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachIn AirIn H2OSpec. Gravity
 °F
°C
 in
mm
in
mm
Ω/Kft
Ω/Km
pf/ft
pf/m
in
mm
lbs/Kft
Kg/Km
1N32PTZ-LR500*
260*
FEP0.017
0.432
19x0.0172
19x0.437
2.3
7.5
60
197
0.120
3.048
198
295
164
244
N/A
500*
260*
ETFE0.0175
0.444
19x0.0172
19x0.437
2.3
7.5
06
197
0.155
3.937
198
295
164
244
N/A

 * See attached specification sheet for recommended maximum temperature exposure times.

  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.


View Product Specification Sheet