Camesa
SEARCHGO

Camesa Contact Us - Phone Call us at +1(281) 342-4494,
Camesa Contact Us - Envelope E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

To access a complete listing of Union® wire rope products, please visit:  www.UnionRope.com

Camesa EMC Banner 1

EMC Product Catalog

7/32” (5.69 mm) Monoconductor 1N22-HS

7/32” (5.69 mm) Monoconductor 1N22-HS

PROPERTIES:

Cable Diameter: 0.224” +0.005” - 0.002” (5.69mm + 0.13mm -0.05mm)
Minimum Sheave Diameter: 13” (33 cm)
Cable Stretch Coefficient: 2.5 ft/Kft/Klbs (2.81 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 1,200 VDC
Conductor AWG Rating: 16
Minimum Insulation Resistance: 1,500 MegaΩ/Kft @ 500VDC (457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance: 4.4 Ω/Kft (14.4 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 5,600 lbs (24.9 KN) Nominal
Maximum Suggested Working Tension: 2,800 lbs (12.5 KN)
Number and Size of Wires:
Inner Armor 12 x 0.0310” (0.787 mm)
Outer Armor 18 x 0.0310” (0.787 mm)
Average Wire Breaking Strength:
Inner Armor 215 lbs (0.96 KN)
Outer Armor 215 lbs (0.96 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachIn AirIn H2OSpec. Gravity
 °F
°C		 in
mm		in
mm		Ω/Kft
Ω/Km		pf/ft
pf/m		in
mm		lbs/Kft
Kg/Km
1N22PXZ-HS420
216		Camtane0.0130
0.330		19x0.0119
19x0.302		4.1
13.5		59
194		0.085
2.159		95
141		80
119
420
216		ETFE0.0115
0.292		19x0.0119
19x0.302		4.1
13.5		59
194		0.108
2.743		95
141		80
119
1N22WG-HS600
316		0.0245
0.622		19x0.0119
19x0.302		4.7
15.4		58
190		0.108
2.743		97
144		80
119
1N22PP-HS300
149		Poly0.0245
0.622		19x0.0119
19x0.302		4.1
13.5		58
190		0.108
2.743		93
139		77
115
1N22PTZ-HS500
260		ETFE0.0115
0.292		19x0.0119
19x0.302		4.1
13.5		58
190		0.108
2.743		96
143		80
119
500
260		FEP0.0130
0.330		19x0.0119
19x0.302		4.1
13.5		58
190		0.085
2.159		96
143		80
119
  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • The nickel coated copper wires are made of ASTM B355 Class 10 and they are used to increase corrosion protection.
  • Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.

© 2013 WireCo® WorldGroup. All Rights Reserved.