Camesa
Camesa EMC Banner 3

EMC Product Catalog

9/32” (7.32 mm) Monoconductor 1N29-S75 Corrosion Resistant

9/32” (7.32 mm) Monoconductor 1N29-S75 Corrosion Resistant

PROPERTIES:

Cable Diameter: 0.288” +0.005” - 0.002” (7.32mm + 0.13mm -0.05mm)
Minimum Sheave Diameter: 16” (41 cm)
Cable Stretch Coefficient: 1.88 ft/Kft/Klbs (2.112 m/Km/5KN)

ELECTRICAL:

Maximum Conductor Voltage: 1,500 VDC
Conductor AWG Rating: 16
Minimum Insulation Resistance: 1,500 MegaΩ/Kft @ 1000VDC (457 MegaΩ/Km @ 1000VDC)
Armor Electrical Resistance: 11.2 Ω/Kft (36.8 Ω/Km)

MECHANICAL:

Cable Breaking Strength:
Ends Fixed: 7,800 lbs (34.7 KN) Nominal
Maximum Suggested Working Tension: 3,900 lbs (17.35 KN)
Number and Size of Wires:
Inner Armor 12 x 0.0400” (1.016 mm)
Outer Armor 18 x 0.0400” (1.016 mm)
Average Wire Breaking Strength:
Inner Armor 302 lbs (1.34 KN)
Outer Armor 302 lbs (1.34 KN)
Cable TypeCore DescriptionCable Weight
 Temp RatingPlastic TypeInsulation ThicknessCopper ConstructionRes TypicalCap TypicalO.D. EachIn AirIn H2OSpec. Gravity
 °F
°C
 in
mm
in
mm
Ω/Kft
Ω/Km
pf/ft
pf/m
in
mm
lbs/Kft
Kg/Km
1N29WTZ–S75500*
260*
ETFE0.019
0.483
19x0.0128
19x0.325
4.0
13.1
54
157
0.136
3.454
161
239
132
198
500*
260*
FEP0.017
0.432
19x0.0128
19x0.325
4.0
13.1
48
157
0.098
2.489
161
239
132
198

* See attached specification sheet for recommended maximum temperature exposure times.

  • While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures above 350°F.
  • The armor wires are made of corrosion resistant alloy steel suitable for low level H2S and CO2 environments.
  • Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68°F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The insulation temperature rating assumes a normal gradient for both temperature and weight.All values shown are nominal or typical values.


View Product Specification Sheet