Camesa Contact Us - Phone Call us at +1(281) 344-0905,
E-mail us, or
Find a Distributor

To access a complete listing of Camesa® wire and wire rope products, please visit: www.CamesaWire.com

EMC Product Catalog

0.36" (0.91 mm) Monoconductor 1Q36-FO-S75

Maximum Conductor Voltage:	1,500 VDC
Conductor AWG Rating:	11
Minimum Insulation Resistance:	1,500 MegaΩ/Kft @ 500VDC	(457 MegaΩ/Km @ 500VDC)
Armor Electrical Resistance:	10.4 Ω/Kft	(34.1 Ω/Km)

Cable Breaking Strength:
Ends Fixed:	10,200 lbs	(45.4 KN) Nominal
Maximum Suggested Working Tension:	5,100 lbs	(23.4 KN)
Number and Size of Wires:
Inner Armor	18 x 0.039"	(0.991 mm)
Outer Armor	23 x 0.039"	(0.991 mm)
Average Wire Breaking Strength:
Inner Armor	286.7 lbs	(1.28 KN)
Outer Armor	286.7 lbs	(1.28 KN)

* See attached specification sheet for recommended maximum temperature exposure times.

Number, type and temperature rating of fiber optic elements is dependent on customer request.
While insulation is rated to 1-hour exposure of 500°F, the fiber optic element in the cable will dictate the maximum operating temperature for the cable.
Fiber in metal tube (FIMT): stainless steel OD of 0.094 in. (2.4 mm). Extra fiber length (EFL) is specified by customer request and subject to manufacturing capabilities.
Attenuation increase in the fiber optic under loaded conditions may vary.
While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures
above 350°F.
The armor wires are made of corrosion resistant alloy steel suitable for low level H2S and CO2 environments.
Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
All values shown are nominal or typical values.